A complete line of cast iron bridge plugs for use with Baker Style and GO Style setting tools are available. Cement retainers and Bridge Plugs that are compatible with Baker Style mechanical setting tools and bridge plugs are available as well.
Legacy Oil Tools® plugs and tools are supplied by a division that has been manufacturing plugs and setting tools for over 40 years.
The Legacy Oil Tools® LHPBP Bridge Plugs have proven to be a product that can be depended upon. It has excellent running characteristics and secure sets. The plug can be set on different types of wireline pressure setting tools. The plugs are designed for rapid drill-out while maintaining sufficient strength during the set. This plug sustains high pressures and temperatures.
The Model LBP™ Cast Iron Drillable Bridge Plug’s modular, field proven design makes it a versatile tool in a variety of applications. The LBP may be set on a wireline setting tool or set mechanically by changing the top slips. The LBP also converts to a LCR Cement Retainer by replacing the solid plug with a sleeve valve.
The Extra Range Bridge Plug is a specialty plug for running through restrictions and then setting securely in larger diameter below the restriction. These restrictions such as seating nipples often force tubing to be pulled before well service can take place. The Extra Range Bridge Plug eliminates this additional work in many cases.
Should the plug need to be removed, it is recommended to use a mill. A plug of such a broad setting range requires it to be made of mild steels and a milling process would be more acceptable.
The Legacy Oil Tools® H-M Bridge Plug is set using hydraulic power to set the top slips and then mechanical pull to complete the set. The Model P is for high pressure and temperature while the Model E sustains moderate temperature and pressure.
A mechanical setting tool is not required because the setting mechanism is built-in. A ball is placed in the tubing string plugging off the built-in equalizing ports. Pressure is then applied to set the top slip and then mechanical pull is applied to finish the set. Releasing the tubing string from the plug is done by simply turning to the right.
Full tubing I.D. is available after releasing from the plug allowing other equipment to extend through the end of the tubing string.
The Model LCR Cast Iron Drillable Cement Retainer’s modular, field proven design makes it a versatile tool in a variety of applications. The SVCR (Sleeve Valve Cement Retainer) may be set on a wireline setting tool or mechanically by changing the top slips. The SVCR also converts to a LBP Bridge Plug by replacing the sleeve valve with a solid plug.
The Model B Mechanical Setting Tool is designed to run and set the Legacy Oil Tools® LCR-MS Cement Retainer and LBP-MS Bridge Plug. It is easy to operate and has low maintenance.
This tool incorporates both a stinger seal and built-in snap latch allowing the tool to be latched into the retainer with set-down weight and released with up-strain and/or right hand rotation. This tool can be run time after time by simply moving the drive housing into the running position. Disassembly is not required every time.
The Legacy Oil Tools® provides a line of wireline pressure setting tools to continue meeting your needs with a quality dependable alternative to what the oil patch currently has.
The Legacy Oil Tools operates the same as always. No new procedures are required. It is a safe tool for your daily operation needs at an affordable price.
For more information call 817.341.5300, 855.737.3397 or contact a sales representative.
© 2024 GEODynamics - All Rights Reserved | Terms & Conditions | Privacy Policy |